Tag: BathroomDesign

Posted on by — Leave a comment

How to Choose a Toilet

No bathroom is complete without a right toilet. You might think a toilet is a pretty standard fixture and doesn’t require much thought. But surprisingly, there are thousands of options when it comes to choosing a toilet for your bathroom. To keep you from going crazy, this quick guide should give you all the vital information and help you choose a high-performance toilet that will fit your bathroom, budget and backside.

Styles

  • Invisible concealed toilets

The cistern (or tank) is hidden inside the wall cavity, ceiling or under counter – leaving only the toilet pan to be seen. This style of toilet is very modern in design and takes up little space in your bathroom – perfect if you are working with a smaller bathroom.

  • Wall faced toilet suites

The back of the pan sits flush against the wall, meaning there are no gaps between the toilet and the wall at all. This is a solid unit and creates a bold look in your bathroom. Due to no gaps between the toilet and the wall, it is easier to clean.

  • One Piece

A “one-piece” toilet is actually six to ten individual pieces sculpted into a seamless unit which has both the tank and the bowl. The result is a sleek, hand-crafted toilet with no crevices between the tank and bowl to collect dirt and odors.One-piece toilets are easier to clean and install than two-piece toilets. One-piece toilets are typically found in modern, contemporary and eclectic bathrooms due to their sleek appearance.

  • Two Piece

A “two-piece” toilet has a separate bowl and tank which are bolted together. Depending on the model, you may be able to mix and match your bowl and tank. If you are interchanging your tank and bowl, make sure the tank securely lines up with your bowl’s bolt holes. Two-piece toilets work well with a variety of styles.

Waste set-out/trap way: S-trap or P-trap

After selecting your style of toilet, it is important to choose the correct pan option to suit your set-out and plumbing requirements. Normally, there are normally two trap versions of each pan model: S-trap, P-trap. Normally S tarp will be used in ground floor installations as piping can be done below ground level. Normally P trap will be installed in top floors because installation of pipe line under the toilet will be difficult.

If your house is in ground level S- trap is suggested for your toilet because it is easy to connect the trap to the ground level. If the house is in upper level from the ground like if your house is in first floor or above that you can choose P-trap because it is connected to the wall. Hence, the trap can be selected according to the level of the bathroom from the ground level.

Siphonic or Wash Down?

·Siphonic

In a siphonic action toilet, the trap way fills with water during the flush which initiates a siphonic action which ‘pulls’ material out of the bowl while the water entering the bowl from the tank through the jet and the rim ‘pushes’ material out. This simultaneous pushing and pulling completely evacuates the bowl during every flush.

·Wash Down

In a wash down action toilet, the water from the tank pours into the bowl and washes the material down the outlet. It is a “pushing” action only, and does not evacuate the bowl. These toilets have small (4″ x 5″) water surface areas in the bowls that are deep down in the bowl. This is the type of toilet most commonly found in homes.

Most US toilets are siphonic; many European toilets are wash down. Most toilets in Greater China are siphonic while many other countries in Asia Pacific are wash down.

Flushing system/water conservation

There are two types in flushing mechanism single flush and dual flush. Some toilets have single flushing mechanism and some have dual flushing mechanism. Single flush utilizes more water at single use. Always its better to choose dual flush toilet while buying. The advantage of using dual flushing mechanism is it saves water when compared to single flush models. Also in flushing mechanism you can choose internal flushing tank which is called as Concealed tank. Orton offers dual flush toilets which uses 3 litres of water for half flush and 6 litres for full flush. This equates to approximately 26,280 litres of water saved in a year for a family of 4.

Cleanliness

Orton Toilet is treated with an ultra-smooth glaze with antimicrobial properties which is applied on top of the conventional glaze and fired-in to the insides of the bowl. It gives the toilet a super smooth finish to which it stays cleaner because dirt has a harder time clinging to it. It also stays cleaner because it inhibits the growth of stain and odour causing bacteria, mould, and mildew on the surface.

Decide on Round Bowl or Elongated one

Round front toilets are compact to fit in small spaces. Elongated toilets have extra room in the front for added comfort. The spherical shape of a round bowl takes up little space, making it a good solution for a small bathroom.

For a larger bathroom, consider an elongated bowl for maximum comfort and style. An elongated bowl is longer than the round bowl, taking on an oval appearance.

Seat Height

Many people find that a taller bowl is more comfortable. Orton offers “Right Height” bowl options for most models. These have a height of between 400-430mm from the floor to the toilet seat, and is based on the ergonomic height of a chair which is between 350mm – 510mm, making it easier to get on and off the toilet, especially for the elderly, pregnant and disabled.

Size& Rough in

Toilets come in various sizes, so check the width, depth, and height of your available space. For a standard toilet, the rough-in measurement should be between 11 inches and 13 inches. Most toilets bolt to the floor 12″ from the wall (not counting baseboard). This is the so-called “rough-in” dimension. When selecting a toilet, start by measuring your toilet’s rough-in. You’ll want to measure from wall to bolt-cap, not from molding to bolt-cap.

Quality Assurance 

Orton toilets are fully tested to ensure superior quality and lasting performance. This includes actually flush testing each bowl at the plant before it is put into the box. Each component must comply with Orton’s strict standards.

Posted on by — Leave a comment

14 Decor Ideas That Make Small Bathrooms Feel Bigger

Does a compact room be a barrier to create your dream scheme? Here are ways to turn a phone booth back into a bathroom and make you forget how small your bathroom actually is.

  • Use lighter, cooler colors.

They feel airy and trick the eye, which look beyond them. And White furnishings will help to bounce light around the room, which makes the room brighter.

  • Continue Floor Tile

A clever trick to making a small bathroom look bigger is to run tile from the bathroom floor straight into the shower stall, which creates a spacious feel. If you change materials, it interrupts the space. Make a small bathroom look infinitely bigger with neutral colours that run along the floor, up the walls and even continue onto the bath and loo. This will create a feeling of never ending space, rather than breaking up the bathroom into separate areas, which can make the room feel boxed in.

  • Make It Appear Large With Mirror

Mirrors can completely transform the look and feel of a room, as they reflect light and create the impression of space. It’s a great trick that interior designers use all the time. Whether you hang a mirror on the wall or go for adventurous mirrored tiles, the reflection is guaranteed to brighten your bathroom. So even if you can only fit in a mini mirror (like the one on the hanging shelf in this bathroom) it makes a big difference. Also, Try Oval Mirrors, Since these mirrors appear to stretch upwards, they make ceilings feel taller and bathrooms feel bigger.

  • Try a glass shower enclosure.

Don’t Block the Shower, Skip the foggy glass or dark curtain, and opt for glass doors. It’ll make the shower feel like liveable square footage. Make sure it’s toughed glass, which is more safe if any breaking happen.

  • Never Block Windows

Light is too important, so go heavy on the lighting and never block the window. A skylight, a bay window or a glass block wall could do wonders. Also , you can choose reflective surfaces, such as a shiny marble vanity.

  • Add A Ledge

 If your bathroom doesn’t have a built-in vanity, opt for a ledge right above the sink. This will hold all your daily essentials (toothpaste, soap) but won’t take up as much floor space as a big piece of furniture.

  • Curve Corners
By making the edge of your vanity soft and rounded, you’ll gain back space and you’re less likely to bang into the edge when you’re in a rush .
  • Go With A Sliding Door

Instead of a door on a hinge that, when open, takes up space in your small room, opt for a door on a rail that stays parallel with the wall at all times.

  • Emphasize the horizontal

A tile border will do just that. If you have a long, narrow room, paint the short walls a darker color to give them more weight. Tap unused vertical space for storage. Put a cabinet above the toilet, for example. Put up lots of hooks. Hang baskets.

  • Buy freestanding and multi-functional furniture

A limited footprint shouldn’t impact on your creative flair. If your bathroom is verging on the small side, consider using freestanding furniture that you can move around at a moment’s notice. Going for freestanding storage and seating allows you to move your scheme around whenever you like and, unlike fitted bathroom units, you can take freestanding pieces with you when it’s time to move out.

  • Trick the eye with tiles

The amount of space you have and what the eye perceives aren’t necessarily the same thing. Play with the boundaries of perception by tiling the side of your bath and the wall with the same design – it makes it hard to distinguish where each begins, thereby making your space feel larger. Marble is particularly effective here, as it looks almost like one huge sheet and the individual tiles aren’t very obvious.

  • Add wall-hung units

Floating fittings visually max the space, as the more of the floor you can see, the more spacious your bathroom will feel, so go for a freestanding basin unit. You can always use the area underneath to store toiletries in pretty wicker baskets. A palette of off-whites and tonal greys will make your bathroom feel large and airy, while wall integrated taps keep the look minimal and well-finished.

  • Add a hint of colour to a white suite

While a white bathroom suite is the best choice for opening up a small space, it can sometimes feel a little stark if the whole room is white. That’s why a hint of colour on the walls is the perfect compromise: light enough to create an airy feel, but with bags more character.

  • Have recessed shelving built in

Recessed shelves are a great space saver, both practically and visually, keeping toiletries neat and off the surfaces. Building the shelves into false walls that hide pipework is a clever use of a necessary feature. Also consider recessed light fittings – either spot or linear.

Now here’s the tips for you. If your bathroom is small, you can afford to splurge on the materials.