Tag: Home improvement

Posted on by — Leave a comment

Pros and Cons of Acrylic Shower Base

When you install a shower, the first thing to contemplate on is the shower base which will serve as the foundation for the shower enclosure. Therefore it is very crucial to make the right choice. If you select a base that cracks or leaks down the road, the costs can be significant because it may require replacing the entire stall or it might have damage the floor below the base. None can claim that a particular type of shower base is better than the others, with each type having its own benefits, acrylic shower pans are near the top of the list in popularity. Here we discuss the pros and cons of acrylic shower bases.

Pros:

  • More cost effective than a tile, marble, or solid surface shower base
Since these units are manufactured in larger quantities they will usually cost less than custom tile showers or solid surface units.
  • Light & easy to work with
Most of these bases are set into a mortared base and are much lighter than marble or solid surface pans so they are easier to maneuver around a small bathroom.
  • One-piece: Low maintenance
To clean the acrylic shower base, you can just wipe the entire unit down with soap and water. In addition, there are no grout joints to have to deal with.
  • Non-porous: Waterproof
Unlike showers with tile flooring and mud pans, acrylic is non-porous, so you don’t have to be concerned about waterproofing the base because it’s already waterproofed.
  • Comfortable and warmer than tile
Acrylic stays warm to the touch, so you don’t have the shock of your feet touching a cold material when you enter the shower.
  • Anti-slip：More friendly to Oldman
Acrylic is more anti-slip than tiles. Also, It is not so hard as tiles even if oldman fall down.

Cons:

  • Not generally associated with high end projects

Most high end luxury homes/hotel will choose tile, stone or solid surface showers vs. acrylic to match the design.

  • Homeowners can’t create custom sizes

Among the most frequently mentioned disadvantages, inflexible sizing ranks high. Since these units are made in standard sizes if you need a custom size acrylic will not be the option for you. Also, because the pans are factory made, the drain locations cannot be varied. In remodeling projects it can be helpful — and save on plumbing costs — to use the old drain location. Since drain locations are pre-set with an acrylic base, you may have to move your existing plumbing.

Must Check:https://ortonbaths.com/understanding-the-concept-of-a-one-piece-toilet/

Must Check:https://ortonbaths.com/comparing-ceramic-toilets-and-porcelain-toilets-which-offers-superior-performance/

Posted on by — Leave a comment

How To Choose The Right Bathtub Material?  

Bathtub is an expensive feat. It’s easy to envision the perfect tub in the perfect shape, size and color, but many people tend to overlook the importance of choosing the perfect material. Exploring the wide variety of bathtub materials can be overwhelming. Being familiar with the options available as well as knowing your needs will not only make your tub hunt easier, but will ensure that you are selecting the perfect style for enhancing your bathing experience and meet your budget needs. Here are the pros and cons of a few common materials that will, hopefully, help you in choosing the best option for your bathroom.

Fiberglass

Fiberglass is a kind of reinforced plastic which is formed into layers then molded into a bathtub shape before being coated with a layer of gelcoat resin.

Pros: At very affordable prices, fiberglass tubs are good for those on a tight budget. Due to the lightweight nature of the material used, they are also easy to maneuver around a house and install, plus, any damages can be easily be repaired.

Cons: Fiberglass is also perhaps the most brittle material on the market. Porous in nature, it absorbs water regularly and has a tendency to crack. Color and finish will also deteriorate over time due to the use of common cleaning equipment.The material also has a tendency to ‘flex’ causing it to warp and feel unstable.

Acrylic

Acrylic is formed by taking a solid sheet of combined materials such as petrochemicals, stabilizers, resins, fillers and appropriate dye which are then heated and molded into a bathtub shape then finally reinforced with fiberglass.

Pros: First and foremost, it is a non-porous material, unlike normal fiberglass and therefore will not absorb any excess water,which means it will stay glossy, never mold and is easy to fix. On top of which, it will also retain heat from the temperature of your water as well as repel any mildew or general bathroom stains. Besides, this kind of tub is of rich designs.

Cons: Acrylic is pricier compared to fiberglass, but it tends to scratch easily if it is cleaned too aggressively. Like Fiberglass, Acrylic tubs will also flex, which makes it less stable to stand on . Depends on the formula, most acrylic tubs will turn yellow with time going.

Stone Resin/Artificial stone

Stone resin is a material used to mimic the look of natural stone. These tubs generally have a more contemporary design, and are made of a high-quality composite material that has a hard surface. These tubs feature an integral drain and overflow system built into its walls, which makes installation a breeze and eliminates any exposed drain piping.

Pros: Like with most resin, color does not fade with repeated water use, the material is non-porous meaning it does not absorb water and retains water heat very well. It has an incredibly long lifespan, lasting for quite some time without the need of constant repair and when it needs to be discarded, stone resin is 100% recyclable. Stone resin is also viewed as a more luxurious bathtub material, not to mention the material itself is quite durable and able to withstand a heavy amount of punishment. Additionally, cleaning is simple and easy. Most stains and mildew will wash away with simple warm water while lightly abrasive substances such as Comet or Ajax can be used for more stubborn residues. Stone Resin is the best bathtub material overall for the price and quality.

Cons: While it may lie on the more expensive side of things compared to Acrylic or fiberglass, stone resin is able to withstand the test of time and will save you quite a bit of hassle down the road.

Cast Iron

Molten iron poured directly into a bathtub mould, before it is smoothed out then covered in a layer of porcelain enamel. This type of bathtub is a high-end option that is built to last.

Pros: Cast iron is perhaps the most durable tub on the market. With the strength of the material used, it is highly resistant to scratches and chipping, meaning less care needs to be placed on cleaning as well. Speaking of cleaning, most if not all mildew will wash off with just plain warm water and baking soda, and if something stronger is needed, light cleaning solutions such as Comet can be used, but very rarely are required. Also, cast iron bathtubs have the high heat retention, meaning your bathtub will keep warm for that much longer.

Cons: Durability also means weight. Cast Iron tubs are incredibly heavy, perhaps the heaviest of any tubs on the market currently. The result is that additional considerations must be made to your house and the support structure around the tub before installation. You are also looking at a hefty price, considering the materials involved and the additional work that goes into supporting the space around it. The porcelain on the surface are in fact quite slippery. Also, the designs for this type of tub is rather limited.

Wood

A custom made bathtub using a variety of different types of wood.

Pros: Aesthetically pleasing with a nice genuine, natural feel to it. Also, since wood is easy to work with, wooden bathtubs can be any shape or size depending on your tastes and does add a certain sense of luxury to your bath time.

Cons: Luxury does come at a heavy price though, as wood in regular contact with water means that your bathtub will not last very long compared to nearly all other bathtubs on the market. Additionally, special considerations must be made in your home to accommodate a wooden tub, such as space and framing. Cost is also a large part of why wooden bathtubs are perhaps not as popular. In addition to the initial cost of the bathtub, regular maintenance must be kept to ensure the longevity of your bathtub. Overuse will invariably wash away the resistant sealing, rotting the wood quicker, while underuse will dry out the wood, speeding up the rotting process. Overall, it is quite a hassle to own a wooden bathtub.

Posted on by — Leave a comment

5 Key points you need to consider when choosing Kitchen Sink

Kitchen revolves around the sink. Choosing a sink that best matches your needs and lifestyle is a critical factor in have a truly functional and efficient kitchen. Here are the key points you need to consider when choosing a new kitchen sink…

  • Size

In additional to making sure that the size of the individual bowls meet your needs, also consider the overall size of the sink. A larger sink provide more space for washing dishes but also takes away counter space which is especially critical in smaller kitchens. Also make sure your new sink will fit the existing cabinets. Some larger sinks might require custom sized cabinets.

  • Number of Bowls

How do you use your kitchen sink? Do you wash a lot of baking pans? If so, consider a large single bowl sink or a dual level sink with enough room to lay the pans down to soak. Most dual level sinks feature an oversized bowl to wash or soak things, with another smaller sink for rinsing or a garbage disposal. Make sure both bowls are large enough to meet your kitchen needs. If you share kitchen responsibilities, consider two sinks. One can be used for food prep and the other for clean-up. An island or bar sink, usually a smaller single bowl sink, is the best option.

  • Features you really need

-Steep, straight side walls

Deeper bowls can accommodate soaking and rinsing large pots and pans. A relatively flat sink bottom increases usable bowl space and allows dishes and glasses to be safely stacked.

-Off-set Drains

Placing the drain to one side provides more flat space for stacking dishes and glasses and creates more usable space under the sink. Offset drains also allow water to drain, even if a large pan or tray is soaking in the sink.

-Web/Divider

For double bowl sinks, make sure the web divider between the two bowls is lower than the outside sink walls. This will provide overflow protection by allowing water to flow from one bowl to the other.

  • Countertop or undercounter

– Undercounter mount sinks mount directly to the underside of countertop material. This installation provides a flush mounting making it easy to clean. When choosing an undermount sink consider what type of countertop you have make sure the edges around the sink opening can be finished.

–Self-rimming sinks have rounded corners and mount on the surface of the countertop material. This is the easiest type of installation, requiring only adhesive caulk to seal the sink in place.

  • Faucet Type

The faucet you choose will dictate the number of holes you need in your sink. Choose your ideal faucet and then order the sink accordingly. Also consider additional holes for accessories such as soap dispensers and pull out hand sprays.

Posted on by — Leave a comment

How to maintain your ceramic basins

Orton ceramic sinks are generally very easy to look after because the surface is smooth, hard and completely closed. Herein, we are introducing you how to clean and look after your Orton  ceramic sink properly in order to retain its harmonious sheen and elegant looks.

Routine Clean& Maintenance

  • Clean your sink regularly to prevent a build-up of soap scum, grease and dirt.

Use a solution of 2 tablespoons of dishwashing liquid to a gallon of water. Scrub the sink’s surface using a soft non-abrasive cloth or sponge. Wipe the sink dry with a dish towel or other soft cloth to eliminate water stains. How often you should scrub a sink depends on how much use it gets: Scrub a bathroom sink after about 30 uses.

  • Protect sinks from scratches and stains.

Replacing a kitchen sink makes no small impact on your wallet. Once you’ve got a shiny new one in place, there are many easy things you can do to keep it in like-new condition:

  • Install a perforated plastic mat in the bottom of your sink. This will protect the sink’s surface from scratches and marks and will protect your dishes, too.
  • Don’t let fruit, vinegar, salad dressing, or other acidic foods linger on the surface of a porcelain enamel sink. Long-term exposure to acids can cause staining and could etch the surface.
  • Don’t use scouring powders to clean your sink. Instead, use the warm water and dish detergent formula we describe above.

Thorough Clean/Refresh

  • De-stain surfaces with lemon juice.

We’ve got a sure remedy for stained sinks: Erase those spots with a paste made of one-half cup of powdered borax and the juice of one-half lemon. Dab a sponge in the mixture, rub, and rinse with running water—it’ll work like a charm whether your sink is made of porcelain enamel, stainless steel, or any other material.

  • Use baking soda to clean

Sprinkle baking soda on any rust spots or stubborn stains. Rust spots will be most common on the base of the sink near the drain. Use the wet sponge to scrub the rust with the baking soda, creating a paste. Let the paste sit for 10 minutes.

  • Make your porcelain sparkle.

Here’s a trick that will bring back the gleam to a white porcelain enamel sink. Line the sink with paper towels and soak them with bleach. Let the towels sit for 30 minutes, then discard them, and rinse the sink with running water. Don’t use bleach on colored porcelain, however, as it may cause the color to fade. Use a mild liquid detergent, vinegar, or baking soda instead.

  • Use vinegar on your lime.

The white spots that you have so much trouble cleaning off the faucets are lime deposits from mineral-rich hard water. They’re very easy to remove with a secret ingredient that’s already in your pantry: vinegar. Soak a paper towel in vinegar, and wrap the towel around the spotted area. Wait 10 minutes and then buff with a dry paper towel. This works well on all fixtures except brass or colored fixtures; using vinegar on these surfaces may discolor them.

  • Keep your drain free of clogs.

Mix up 1 cup of baking soda with 1 cup of salt and 1/4 cup cream of tartar. Keep it in an airtight, childproof container. Every few weeks, pour 1/2 cup of the mixture down each drain, followed by a quart of boiling water. And of course, do your best to keep hair, soap, grease, food, and other debris out of your sink drains in the first place. Following these few steps should keep you clog-free! 

Tips

  • Remember to avoid contact of your sink with products that are high in acidity.
  • Do not use any dishwashing detergents or bleaches containing chlorine.
  • Do not use metal scouring pads on your sink, which can not only cause chips and scratches, but can also lead to discoloring on your sink’s surface.
Posted on by — Leave a comment

Buying Guide: Kitchen Sink

Choosing the right kitchen sink is absolutely important, as it’s not something that you replace every year . But with such a wide variety of kitchen sink materials out there, and an even wider range of prices, which one is right for your kitchen? Hope this article helps.

Stainless Steel Sinks

More people buy stainless-steel kitchen sinks than any other type of sink. Stainless steel is a low-carbon steel which contains chromium at 10.5% or more by weight.  The addition of this chromium gives the steel its unique stainless, corrosion-resisting and enhanced mechanical properties.

Pros:

  • Very durable – corrosion and rust resistant and normally come with lengthy guarantees
  • Usually the cheapest of all the materials
  • Top mount, flush mount and undermount options available
  • Low maintenance

 

Cons:

  • Noisy – the thinner the steel the noisier the sink
  • water spots can become an issue
  • Sinks with thin stainless steel are more likely to scratch
  • Can get dented easily if something heavy is dropped in it
  • The best stainless sinks can cost more than other materials

Composite Sinks

When people talk about composite kitchen sinks, they’re usually talking about a granite or quartz composite. Composite sinks are made by combining crushed granite or quartz with a resin filler. The mixture varies depending on the product and manufacturer, but it’s usually around 80% stone and 20% resin.

Pros:

  • Extremely durable – most composite sinks are heat, stain and scratch resistant
  • Prices are coming down all the time
  • Anti-bacterial surface, resistant to scratches, chips and water stains which is also easy to clean
  • Lengthy guarantees
  • Huge range of colours, sizes and styles available

Cons:

  • Very hard surface that can damage things that are dropped on it
  • Require careful maintenance
  • Heavier than stainless steel so need a more sturdy worktop

Fireclay Ceramic Sinks

Fireclay sinks are made of clay and minerals and then fired at extreme temperatures, being made by moulding a ceramic clay into the shape of the sink and allowing it to dry at a high temperature for a period of up to 40 hours. Once the clay has dried, the porcelain enamel is applied and the sink is places in a tunnel kiln at an extremely high temperature (in some cases higher than 2000⁰F) for a period of around 20 hours.

Pros:

Easiest to maintain and keep clean
Extremely durable – heat and stain resistant
Effortlessly stylish
Withstands most household chemicals

Cons:

The most expensive option
Can chip (although can be repaired)
Very heavy and less choice available
Very hard surface that can damage things that are dropped on it

Posted on by — Leave a comment

How to choose a tap?

Taps may seen like a small piece of the puzzle when it comes to bathrooms. They are an essential element of any bathroom, not just functionally but visually they can make or break a bathroom design. It’s a small item but makes a big difference. So how should we select the right taps for our washbasin?

About Styles

When selecting a design, consider the other elements of your bathroom. Rounded basins, baths and bathroom accessories look great paired with taps that have curved spouts and rounded handles. Likewise, taps that have a square and angular design will complement a bathroom with straighter lines. Generally, a three-piece taps set provides a traditional look and a mixer provides more contemporary look.If you’re retrofitting an existing bathroom and updating only cosmetic details, you’ll need to stick with what you already have – unless you’re prepared to re-plumb the in-wall components and re-tile the area. Remember the design is equally as important to hold and feel the taps you are considering to be sure they feel comfortable and easy to use.

It’s best to select your basin and taps in conjunction with one another as either item raises considerations for the other. For instance, a taller tap or a wall-mounted design may be required to suit an above-counter basin. A longer spout may be required to extend across a deeper inset basin.

Also, the taps can be classified into Pillar tap, Monobloc basin taps, Basin mixer taps, Wall mounted basin taps.

Pillar taps (traditional basin pillar taps)

Available in modern and traditional designs, pillar taps are supplied as a pair, and consist of one tap for the cold water and another for the hot water. They can feature cross-head or lever handles, and are for use with a basin that has two tap-holes.

Monobloc basin taps (modern basin tap)

Monoblock basin taps are designed for use with sinks that have a single tap hole. They feature a single spout that delivers a mixture of cold and hot water. The flow and temperature of the water is controlled by an easy to use single lever handle. This type of tap is available in a variety of modern designs.

Basin mixer taps (traditional basin mixer tap)

A basin mixer tap is similar to a monobloc tap; it delivers a mixture of hot and cold water through a single spout, but has separate controls instead of a single handle. This type is available in both modern and traditional designs.

Wall mounted basin taps

A wall mounted basin tap is a great option for creating a neat, streamlined look. This type of tap is mainly used with a countertop basin that does not have any tap holes. Wall mounted taps are difficult to install compared to a monobloc tap, so hire a plumber if you lack the DIY skills.

About color & Finishing

While the majority of taps are available in a chrome finish, there is now a growing range of alternative finishes available, from black, white, gold, graphite and copper. However, changing taps is not something you want to be doing often, so we advise clients to make timeless decisions with taps that is less likely to date. Choose a finish that you love and that will suit the overall colour scheme and style of your bathroom. Remember to consider matching the finish of other elements, such as the shower set and bathroom accessories such as towel rails, toilet roll holders and shower frames.

  • Chrome

Chrome is the most popular finish for bathroom taps – the vast majority of taps on the market are finished in this way. Chrome-plated taps are resistant to corrosion and scratches while their shiny, reflective finish is easy to clean and creates a clean, modern look.

  • Gold

Gold taps have always been a popular choice in period style bathrooms, although they have gained a reputation for peeling and tarnishing as the gold finish was only plated-on rather than dipped. However an increasing number of new taps feature a finish known as “Antique Gold” a lighter, shinier chrome-gold which is more robust as it has been dipped. Be aware of the colour difference between the old darker gold and new Antique Gold taps if you are looking to replace like-for-like.    

  • Nickel

Another relatively new finish which is increasing in popularity is nickel, using it to give their taps a high class finish. A nickel finish combines strength and durability with a lustrous light gun metal look but it also comes with a premium price tag.

  • Stainless-steel

This kind of taps aren’t as shiny as chrome, but they’ll still look smart and pristine. They’re easy to clean and hard wearing, so will look good for many years to come.

About Functionality

Remember to consider what your taps will be used for and the type of basin the water will flow into. Do you need a taller tap or a wall-mounted version to fit over an inset or above counter basin?

About material

  • Solid brass

Where possible choose taps made of solid brass as they are extremely resistant to corrosion. While recycled brass is most often used, there are models on the market from luxury tap manufacturer that are made of pure ‘virgin’ brass. This metal contains no impurities and means that the water doesn’t have the usual strange taste normally found from regular bathroom taps.

  • Ceramic discs

Taps that contain ceramic discs rather than traditional rubber washers are much more hardwearing and resilient to wear and tear, making them a longer lasting option. The majority of ceramic disc taps require only a 90 degree turn to go from being off to being on which makes them easier to use.

About water pressure

As a general rule, low pressure is up to 0.5 bar, 0.5 bar to 1.0 bar is medium pressure and anything above 1.0 bar is high pressure. To get a decent flow of water from your taps it is vital that you choose ones that are appropriate for the water pressure in your home. If you have a gravity-fed system it means you have low pressure while a combination boiler system means yours is medium to high pressure. As a general rule most single-lever mixers, floor standing and wall mounted taps will need high water pressure to function effectively, while taps with two handles and pillar taps can function efficiently with low pressure.

A low pressure tap will work well with high pressure system, however using a high pressure tap in a low pressure system will result in a slow water flow, meaning that it will take more time to fill a basin and even longer to fill a bath. Always check that the tap you want is suitable for your water system, otherwise when you want a bath you could end up waiting for half an hour for your tub to be filled.

As you can see, there is an array of options when choosing your bathroom taps. Your tap needs to be able to stand up to constant use and still look good in years to come because bathrooms are a heavy use area. Ultimately, it comes down to you finding the right mix of design, functionality and durability. Hope above mentioned points can help you easily find your perfect taps.

Posted on by

How to choose a bathroom sink?

Bathroom sinks come in many sizes, shapes, and colors. Not only the appearance, but also the material affect the style & practicability of your bathroom. What your bathroom sink is made of can affect its maintenance, durability, and, of course, style. From clay to woods to glass, understand the benefits of the different types of materials available for your bathroom sinks.

Ceramic:

Ceramic is a type of pottery made of clay and hardened by heat. They are normally made by taking mixtures of clay, powders, and water, shaping them into form and firing in a high temperature oven, or Kiln. Features Extremely strong surface that is resistant to scratching, chipping and impacts , which makes them able to withstand the rigors of everyday use. Maintenance & Clear Ceramic is particularly hard, smooth, and completely sealed. Therefore, dirt is unable to penetrate the surface of the sink. This makes cleaning and maintenance extremely easy; simply wiping off dirt and dust with a soft dry cloth is adequate for daily cleaning. For a more thorough cleaning, we recommend using a gentle all-purpose cleaning product and a soft sponge or cloth. If you have a hand-painted or glazed ceramic sink, clean with a non-abrasive cleaner. Do not use bristle brushes or abrasive sponges, as they may damage the decorative surface. Do not let cleaners soak on the surface of your sink. Rinse and wipe with a soft dry cloth after use and cleaning to prevent soap buildup.

Natural Stone

Stone sinks are carved from a single block of stone. Each block of stone has its own distinctive traits including color variation, veining, minor pits, and flecks of minerals. Some sinks are completely shaped and polished, while other stone sinks are left with unfinished features for dramatic contrast. Features Each stone sink is created under natural conditions, making it entirely unique and be individual works of art. Natural stone sinks range in color and characteristics, which add upscale feeling to your bathroom design. Maintenance & Clear Because most stone is porous, it is important to take special care of your sink to protect against harmful substances. Upon receiving your sink, seal with Sealer. To retain your sink’s natural shine, reseal your sink once or twice a year. When installing your sink, carefully use silicone to seal the drain and use extra caution to keep the silicone away from the exposed sink area. Oil-based sealers or plumber’s putty should never be used on a natural stone sink. These products will stain the stone if applied near the surface of the polished basin. We recommend that you regularly clean your natural stone sink with a mild dish detergent or stone cleaner. After each use, wipe the basin dry with a soft cloth. Do not allow mineral deposits such as iron, salt, lime, or soap to build up on your sink. Refrain from using acidic household cleaners, wipes with harsh chemicals, or abrasives, as these will damage stone

Stainless Steel

Stainless steel resists bacteria and germs, and are able to withstand the tough scrubbing. Additionally, this type of sink can be paired with most countertop materials because of its sleek color and look.

Features :

Stainless steel sinks are handcrafted from heavy gauge stainless steel and are extremely durable, resistant to corrosion and staining, but can be scratched or scuffed when not cared for properly.

Maintenance & Clear :

To maintain the condition of your stainless steel sink, simply clean daily with mild soap and warm water, and wipe the entire surface dry with a dry, clean, soft cloth after each use. Keep sink free of any standing water to prevent the build-up of mineral deposits that can affect the appearance of your sink. Because iron particles often develop rust spots in stainless steel surfaces, do not leave steel cookware or utensils on the surface of the sink for long periods of time. Do not use cleaners containing acids, harsh chemicals, or abrasives. Use a Stainless Steel Scratch-B-Gone Kit to remove minor scratches and maintain the beauty of your stainless steel fixture.

Resin

This stone-like material is made of a poly-resin blend, known as “man-made stone” Resin is solid and consistently colored throughout. Because it can be cast into nearly any form or size, resin sinks and tubs are available

Posted on by — Leave a comment

Tips of getting good quality vanities!

How is the quality of your vanity shopped online? Tips of getting good quality vanities

1. Appearance

You need to check the appearance of the vanity.

  • Observe the vanity surface. On the upper /lower/left/right sides of the cabinet, black lines, dead knots, scratches, particles, dark spots, broken skin, color difference, wrinkles and other defects should not be allowed.
  • Check the inside of the cabinet with your hands. In principle, there should not be any internal defects. If any minor flaws are found, they can be ignored without affecting normal use.
  • The finish of the bathroom cabinet should be smooth, without particles, roughness, fogging, scratches, pinholes etc.
  • Use a tape measure to check the dimensions of the bathroom vanity to see if it is the same size as the one you ordered.
  • The color of the actual arrival product should very much match the product shown on the product page of the website. Color difference which mainly depends on the color depth error and the color error at the joint. Generally, the color of the entire bathroom vanity should be consistent and there should be no difference.
  • The cabinets cannot be inclined or asymmetrical. Things should not be moved while placed on cabinets.

2. Material

After the surface inspection, look at the material. The quality of the material will decide the service life of the bathroom cabinets. Unfortunately, there are quite few businesses on the market that use inferior materials to impersonate high-quality materials. Therefore, you must pay attention to the inspection of your goods.

  • The consistency of materials. You will not want to have different tones from different batch.
  • No crack is allowed.
  • No insect or decay are allowed
  • The materials used must meet the requirements of environmental protection and cannot contain substances that are harmful to human body.

3. Cabinet Doors, drawers

The gap between the cabinet doors should not be more than 3mm. The left and right door panels should be neat and there should be no visual fluctuations. If it is a push-type drawer, the distance between the edge of the drawer and the cabinet should not exceed 3mm. If the gap is too large, water vapor can easily enter and corrode the cabinet contents. However, the gap should not be too small, otherwise the friction, resulting in poor opening and closing, and will affect the product life. During the inspection, check the guide rails of the drawer. A good guide rails can enter and exit freely after a reasonable load without noise.

The door hinge is also the focus of acceptance. The door hinge should be open and closed freely and should not be too loose or too tight. In addition, pay attention to whether the installation position of the door hinge is reasonable and whether it will affect daily use. Finally, check the door hinge for rust.

4. Washbasins

The washbasin is an important part of the bathroom cabinet and is in contact with water every day, so it is also important to check. The surface of the wash basin should be smooth without scratches, and the glaze is smooth and free of bumps. In addition, the water drain under the basin should also be checked to see if it can be easily taken and put and if it will be easy to block.

5. Legs

To check whether the four legs of the cabinet are stable and whether they are on the same level. If the four legs of the cabinet are not stable, the cabinet body is easily stressed. This not only affects the appearance, but will also seriously affect the service life of the bathroom vanity.

Good luck on choosing a good quality vanity!!!

Posted on by — Leave a comment

Feel too hard to distinguish good shower enclosures from bad ones? Here are the tips!  

Shower enclosure has been a very common element of contemporary bathroom designs, and it’s getting a more and more popular. Many consumers don’t know how to distinguish good shower enclosures from bad ones, they love shower cubicles, but often were misled by unscrupulous merchants end up with buying inferior products. Do they know how danger a bad shower cubicle can be? Those glass doors from inferior products in your shower can spontaneously explode!

Let me tell you how to know if it is a good one!

Tempered glass of the shower enclosure

The tempered glass is the most important part of the shower enclosure structure. Many unknown shower enclosure manufacturers/trading company use semi-tempered glass or ordinary glass in order to make more profits, which will lead to an explosion of the shower doors, a huge threat to safety! During the purchasing, you should observe whether the glass is transparent, whether there are defects such as impurity pot or bubbles, and whether there is a 3C certification mark on the glass in china, (DOT in US, Emark in EU, JIS in Japan, SAI in Australia) . High-quality shower enclosure should be made of fully tempered glass for automatics with high permeability and tempered hot lines. As this kind of glass is uniform tempered, it is of high safety, even if accidentally broken will not hurt the body.

The aluminum frame of shower enclosure

As the aluminum frame will bear the weight of tempered glass, which can be tens of kilograms or even hundreds of kilograms, the hardness and thickness of the aluminum plate are very important evaluation indicators. When you chose a shower enclosure, pay attention to the smoothness of the surface, chromatic aberration, if any pinholes, then observe what material it was used. Generally, the aluminum used in the high-quality shower enclosure is aerospace aluminum which were sandblasting with oxidation, being resistant to rot and stainless. The thickness should be more than 1.2mm to keep stability.

The hardware of shower enclosure

The hardware is also very important for the durability of the shower enclosure. Most of the poor quality shower enclosures are equipped with the aluminum which used in construction, of which the hardness is between 15-16. This kind of aluminum is of low price and high hardness, but with many impurities and large brittleness, which is very easily deformed during the usage. Quality shower rooms are made of aerospace aluminum and stainless steel fittings. The aluminum are processed into aluminum magnesium titanium alloy, being very excellent in anti-scratching, anti-fading. The hardness is about 14, moderate hardness& toughness and not brittle. The aluminum wall thickness is 1.5-4mm, not easy to deform.

With orton, learn a little bit more about bathroom products!

Must Read:https://ortonbaths.com/understanding-the-concept-of-an-led-mirror/

Must Read:https://ortonbaths.com/comparing-one-piece-and-two-piece-toilet-seats-which-is-the-better-choice/

Posted on by — Leave a comment

Separating wet and dry areas in bathroom

We all know that bathrooms tend to accumulate moisture, mess and mould—separating wet and dry areas can create a usable room that boosts liveability, while removing the possibility of muck and mildew building up.

The dry zone generally contains a vanity and toilet area. These are the most frequently used areas in the bathroom, so it’s important you keep them dry! But how do we maintain them “dry”???

You need perfectly polished Glass walls.

We place all messy water activities to one side of the room thus to use a glass wall to keep the spaces separate. its a bad idea to use partition walls, because you are darken the space and blocking the light from window. A glass wall shall make your bathroom brighter and looks larger, while aesthetically pleasing results. And Here are the types of glass wall you can choose.

#1 Frameless Glass Partitions

#2 Framed Ones

stylish isn’t it? it also keeps your dry area really “dry”

#3 The Half Glass

A half glass partition creates the perfect walk-in shower, which is basically a waterproofed showering area that has no hinged doors, enabling you to simply ‘walk in’.

Ideally, you don’t want to track water around the dry zone after bathing because the next person/guest who needs to use the toilet or basin….

If you would like more information on this topic, get in touch with one of our professional sales – we’ll be happy to talk through your different options.

Must Visit:https://ortonbaths.com/the-significance-of-wc-in-european-toilet-terminology/

Must Visit:https://ortonbaths.com/examples-of-sanitary-ware-a-comprehensive-overview/